HT760  2x30W i2s Input, inductor Free, Stereo Class D Amplifier
1、FEATURE
Power supply:
-PVDD:4.5V-22V; -DVDD: 3.3V
Audio Performance
-BTL,2x33W(PVDD=22V,RL=8Q
THD+N=10%)
-PBTL,50W(PVDD=22V,RL=4Q,THD+N=1%)
-THD+N=0.05%(PVDD=12VR=4Q,PO=1W)
Noise:100uV (Gain= 19dBV, A weighted)
·Low Quiescent Current
-12mA at PVDD = 12V, no filter
·High efficiency in 1SPw mode (>90%)
"Inductor-free Operation (Ferrite Bead) and EMC
compliant for most cases
·Flexible Audio //O
-I2S, LJ, RJ, TDM input
-8,16, 32, 44.1,48,88.2,96,192kHz Sample
Rates
·General Operational Features
2、APPLICATIONS
Bluetooth/i-Fi Speakers
，"Portable Speakers
·LCD TV/Monitor
Sound Bars, Docking stations, PC Audio
Smart speakers
3、GENERAL DESCRIPTION
   The HT760 is a stereo Class D audio amplifier withmultiple audio format port (IS, LJ, RJ, TDM). It supports a variety of audio clock configurations
The outputs of the HT760 can be configured todrive two speakers in stereo BTL mode or monoPBTL mode.The HT760 also includes hardware and software
control modes, integrated digital clipper, and a wide power supply operating range to enable use in amultitude of applications. Advanced EMl Suppression with Spread Spectrum Control enables the use of inexpensive ferrite bead
filters while meeting EMC requirements for system cost reduction. An optimal mix of themal performance and device cost is provided in the 150-mΩ Ros(on) of the output MOSFETs. Additionally,a thermally enhanced 36-Pin QFN provides excellent operation in the elevated ambient temperatures found in modern consumer electronic devices -Hardware or Software Control mode
-4 Programmable l2C Addresses Spread Switching Frequency for Class D
"Robustness Features -Clock Error, DC, Over Current, Overvoltage
Undervoltage, and Overtemperature Protection "Packages:Pb-free Packages, QFN36L-6x6
4、Website：www.baitaishengshi.com
5、TYPICAL APPLICATION